LBC-586Plus-133-0 - Winsystems LBC-586Plus-133-0 CPU Board with 586Plus-133 586DX processor, 256KB cache...
Request Quote
For Price
- Part Number:
- LBC-586Plus-133-0
- Model Number:
- LBC-586Plus-133-0
- Make:
- WINSYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
Winsystems LBC-586Plus-133-0 CPU Board with 586Plus-133 586DX processor, 256KB cache Simple Type: CPU Board
The LBC-586Plus combines a CPU with Ethernet, video, solid state disks, floppy, IDE, serial and digital I/O. Its feature-rich onboard I/O controllers makes the LBC-586Plus ideal for embedded control industrial applications requiring operator interface or as a network computer. Plus its PC software compatibility assures easy program development and checkout.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- +5 volt only operation
- 133MHz 5x86 CPU
- 16-bit PC/104 expansion connector
- 256KB Level 2 cache
- 4 RS-232 serial ports with FIFOs; COM1 & COM2
- 48 bidirectional TTL digital I/O lines with 24 capable of event sense interrupt generation
- AT keyboard controller
- Bidirectional LPT port that supports EPP/ECP
- High-resolution, SVGA video controller
- IEEE 802.3, 10Mbps NE2000 compatible Ethernet controller, integrated AUI and 10BASE-T I/F
- Onboard floppy disk controller
- Onboard PCI EIDE hard disk interface
- PC-AT software compatible
- Real-time clock with battery backup
- Small size: 5.75 x 8.0 inches (146mm x 203mm)
- SMM/SMI supported
- Speaker port and onboard piezo transducer
- Status, hard disk and Ethernet activity LEDs
- Three 16-bit counter/timers
- Two interrupt controllers and 7 DMA channels
- Two solid state disk sockets support onboard bootable DIP Flash, SRAM or (EP)ROM
- Up to 288MB Flash Disk with Flash File System
- Up to 64 Mbytes of installable system DRAM with either EDO or Fast Page SIMM supported
- Upgrade for WinSystems’ LBC-486
- Watchdog timer and power-fail reset
- with optional onboard RS-422/485/ J1708 support
Specifications
- AUI: 16-pin dual on 0.100” grid
- CRT: 10-pin dual on 0.100” grid
- Dimensions: 5.75” x 8.0” (146mm x 203mm)
- EIDE Interface: Supports 2 drives
- Ethernet data rate: 10 megabits per second
- Floppy Disk Interface: 34-pin 0.100” grid
- IDE Interface: 40-pin 0.100” grid
- Jumpers: 0.025” square posts
- LBC-586Plus CPU Clock: 133 MHz
- LPT Interface: Bidirectional LPT with ECP/EPP
- Non-condensing relative humidity: 5% to 95%
- Operating Temperature: -40 C to +70 C
- Panel: 50-pin dual on 0.100” grid
- Parallel I/O: 26-pin 0.100” grid
- Parallel Interface: 48 I/O lines, TTL compatible. Output: IOL: 12mA at 0.6 volts. Input: 10K nominal pull-up resistor
- PC/104 Bus: 64-pin 0.100” socket. 40-pin 0.100” socket
- PC/104 Interface: 16-bit, non-stackthrough
- Power: 8-pin in-line Molex
- Serial Interface: 4 Serial channels with RS-232 levels. RS-422/485 optional using the CK-75176 kit on COM1 and COM2 only
- Serial, Parallel, Keyboard: 50-pin on 0.100” grid
- Solid State Disk Capacity: Two, 32-pin memory sockets support up to 1MB SRAM or Atmel Flash, 2MB of EPROM or up to 288MB DiskOnChip
- System Memory Addressing: 64 Megabytes
- System Memory Cache: 256K bytes
- System Memory Capacity: 72-pin EDO or Fast Page SIMM supplied and installed by user
- Twisted Pair: RJ-45
Applications
- None Available
Aliases
- None Available